Linear grain
A visible, directional pattern that should align across panels in the same assembly.
Decorative Finish
Brushing for Custom Manufactured Parts
A directional abrasive finish for visible metal panels, housings, trim, and equipment components.
- Directional grain
- Technical appearance
- Controlled visible surface
Finish overview
Directional texture for visible panels and equipment surfaces.
Brushing creates a linear abrasive grain used on stainless panels, aluminum front plates, trim, and visible housings. It can make a part feel deliberate and technical while helping minor handling marks follow a consistent direction.
Because the finish is directional, nesting, bending, welding, and assembly orientation matter. Grain direction should be shown on the drawing, and visible faces should be protected through packaging and installation.
Appearance
What the finished surface can look and feel like.
Satin reflection
Reduces mirror-like reflection while retaining a metallic surface.
Edge continuity
Bent edges and welded corners may require separate blending instructions.
Suitable processes
Manufacturing routes commonly paired with this finish.
Suitable materials
Base materials that require process-specific review.
Typical applications
Part families commonly reviewed for brushing.
Control front panels
Stainless equipment covers
Consumer electronics trim
Instrument faceplates
Kitchen and appliance panels
Visible mounting brackets
Benefits
Where this option can add value.
- Creates a consistent directional industrial appearance
- Retains the character of the base metal
- Can be coordinated across sheet and machined components
- Provides a practical satin surface for visible panels
Limitations
Requirements that need engineering review.
- Cross-grain scratches remain conspicuous.
- Complex recesses and internal corners are difficult to brush uniformly.
- Weld blending can change local grain and sheen.
- Panels need protective handling to preserve directional consistency.
RFQ checklist
Finish details to include in the quotation package.
Clear requirements help engineering, finishing, inspection, and purchasing review the same target.
- 01Grain direction on each visible face
- 02Reference sample or abrasive appearance
- 03Faces requiring protection
- 04Weld and corner blending requirements
- 05Logo or marking orientation
- 06Protective film and packaging expectations
Related parts
Representative geometry from the parts gallery.
The first three gallery entries identify brushing directly. The structural frame is a related aluminum geometry for finish comparison.
Related finishes
Compare appearance, material compatibility, and functional intent.
FAQ
Brushing questions from engineering and sourcing teams.
Why should brushing direction be shown on the drawing?
The grain is visibly directional. Marking its orientation prevents adjacent panels or bent faces from appearing inconsistent in the final assembly.
Can welded stainless assemblies be brushed?
Yes, but weld cleanup and local blending can create visual transitions. Joint location, acceptable blending, and cosmetic faces should be reviewed before fabrication.
Is brushing a protective coating?
No. It is a mechanical surface treatment. Corrosion needs depend on the base material and may involve passivation, anodizing, or another finish.
Start your RFQ
Upload your drawings and receive an engineer-reviewed quotation.
Share the material, process, quantity, finish, critical requirements, and delivery needs. contact@kewei-kw.com / +86-13929495765